Techware Suite
DRAFT FOR REVIEW · OCTOBER 4, 2026 · NOT PUBLISHED
Software for civil and geotechnical engineers

One project. Five suites. One soil profile.

Techware Suite follows a civil project from the first boring to the last field report. Enter the ground once, and every suite builds on it: foundations, walls, water, specs and construction.

Join the Geotechware pilotSee the suites
geotechwarePilots open
deflectechwarePlanned
hydrotechwarePlanned
spectechwarePlanned
sitetechwarePlanned
The suites, in project order

Each suite answers one question on the job.

Buy the suite you need today. Add the next one when the project gets there, and it already knows your borings, your units and your report format.

1 · THE GROUNDgeotechwareWhat's in the ground, and what will it carry?
  • Boring logs, lab data, CPT
  • Seismic site class + liquefaction
  • Compression, tension, lateral and bi-directional load tests
  • Pile + shallow foundation design
  • Settlement, slopes, ground improvement, pavements
Pilots open
2 · STRUCTURES UNDER LOADdeflectechwareWill it hold, and how far will it move?
  • Concrete, CMU and MSE walls
  • Soldier + sheet pile walls
  • Deflection + floor vibration
  • Load rating of existing structures
Planned
3 · WATERhydrotechwareWhere does the water go?
  • Runoff (rational + SCS)
  • Detention + pipe sizing
  • Dewatering + seepage
Planned
4 · THE DOCUMENTSspectechwareWhat goes in the specs?
  • Spec writer on MasterFormat sections
  • Load test spec templates
  • Special inspection statements
  • Submittal review
Planned
5 · CONSTRUCTIONsitetechwareWas it built the way it was designed?
  • Field testing + inspections
  • Concrete maturity (C1074)
  • Instrumentation + alerts
  • Earthwork quantities
Planned
How it fits together

Enter the boring once. Every suite reads it.

Most firms retype the same soil profile into four programs and two spreadsheets. In Techware Suite one profile per boring feeds every analysis, and each result can feed the next suite. Here is one drilled shaft wall, start to finish:

GeotechwareBoring B-3 loggedSoil profile, groundwater at 12 ft
GeotechwareLateral load testMeasured p-y curves back-calculated
DeflectechwareWall designedShaft deflection checked against the measured curves
SpectechwareSpec section writtenShaft and test requirements from the design
SitetechwareBuilt + verifiedInclinometer readings against the design limits
One soil profile per boring

Shared by every suite and module, in US or SI units.

Live data from the start

Manual entry, CSV import or live loggers, in the field or at the desk.

Reports a PE can seal

Full calc packages as PDF plus editable Word.

One sign-in

Your team, projects and licenses in one place, on the web or the desktop field app.

Available first

Start with geotechware

Load test results while the jack is still on. Geotechware runs the test, draws the load-settlement curve live, and writes the report the hour the test ends.

  • Live curves with automatic Davisson and creep interpretation
  • Bi-directional tests with equivalent top-load curves
  • Test results that feed axial and lateral design directly
CompressionASTM D1143
TensionASTM D3689
LateralASTM D3966
Bi-directionalASTM D8169

Drilled shafts, driven piles, ACIP/CFA piles and micropiles. Each test module sells alone or as the Test Suite bundle.

Pricing

Pay for the suites you use.

Every suite is sold on its own, by the project or by the year. Bundle them when your work spans more than one.

Per project

One project, one suite. Good for a single load test program or a one-off design.

Quoted per project

Annual seat

Unlimited projects in the suites you license, for each engineer on your team.

Quoted per seat

Full suite

All five suites for firms that carry projects from the boring through construction.

Request a quote

Who builds it

Built by a practicing engineer.

Techware Suite is founded by Joe Troescher, PE, a licensed professional engineer in North Carolina. Every analysis is built from published methods and checked against real field data, and every report is laid out the way a reviewing engineer reads it.

Geotechware pilots are open now for firms running static or bi-directional load tests in the next six months.

Join the Geotechware pilot

This draft form isn't connected yet, so nothing is sent.