Condition assessment
Walk the structure on a tablet. Each defect gets a photo, a location on the plan and a condition rating.
Modules
What Inspectechware covers.
Buy the modules you need. Each one reads the same soil profile and writes the same report format as the rest of Techware Suite.
Inspect
Crack, spall + corrosion mapping
Draw cracks and spalls on the plan or elevation, with width, length and area summed by member.
NDT data
Bring in GPR, half-cell potential, pulse velocity and rebound readings and plot them on the plan.
Parking structure programs
Repeat garage condition surveys with last cycle's defects carried forward and changes flagged.
Repair
Concrete repair
Repair type, depth and material for each defect, with the evaluation and design basis written out.
Masonry repair
Repointing, unit replacement and anchor repairs for brick and CMU.
FRP strengthening
Fiber-reinforced polymer wraps and strips for flexure, shear and confinement.
Repair quantities + cost
Areas, lengths and counts roll up from the defect map into a bid-ready quantity table.
inspectechware envelopeModule
Dew point + condensation
Temperature and dew point through each wall and roof layer, with the condensation plane marked.
Roof + cladding wind uplift
Components and cladding pressures by zone, with attachment checks for roofs and panels.
Below-grade waterproofing
Hydrostatic pressure on basement walls and slabs from the groundwater level in the boring.
Field water testing
Window and curtain wall water tests logged by opening, with pressure, duration and leak locations on the elevation.
Air leakage
Whole-building and assembly air leakage tests with the result against the target rate.
Envelope condition surveys
Roof, wall and window surveys on a tablet, with photos pinned to the elevation and a repair priority on each item.
Facade inspection programs
Repeat facade inspections on the cycle your local ordinance sets, with last cycle's findings carried forward.
How it works
Four steps, one record.
1
Walk the structure
Defects go on the plan with a photo and a rating, right where you find them.
2
Add the test data
NDT readings and lab results plot on the same plan as the defects.
3
Design the repairs
Pick a repair for each defect type. Quantities roll up as you go.
4
Seal the package
Condition report, repair drawings and quantities as PDF and editable Word.
One map, start to finish
The crack you photographed is the line item you bid.
Most repair projects retype the field notes three times: into the report, the drawings and the quantity sheet. Inspectechware keeps one defect map, so the survey, the repair design and the bid quantities never disagree.
- Every defect pinned to its location with a photo
- Repairs assigned by defect type, quantities summed automatically
- Next cycle's survey starts from this one
Repair itemFrom the mapQuantity
Crack rout + sealLevel P28 cracks86 LF
Partial-depth patchLevel P23 spalls142 SF
Full-depth patchLevel P21 area18 SF
Half-cell below −350 mVLevel P2ASTM C8763 zones
Quantities sent to the Spectechware bid form
Outputs
Reports a PE can seal.
Every module ends in a calc package laid out the way a reviewing engineer reads it, as PDF and editable Word.
ACI 562ACI 318ACI 440TMS 402ASTM C876ASTM C597ASTM C805IBC
Condition assessment report
PDF + WordDefect plans + elevations
Per levelNDT result plots
On the planRepair calc package
PE-sealableRepair quantities
Bid-readyPart of Techware Suite
Enter it once. The next suite already knows.
→StructechwareLoad ratingMeasured section loss and damage feed the load rating in Structechware.→GeotechwareBelow-grade waterThe water level from the boring sets waterproofing pressure.→SpectechwareRepair + envelope sectionsChosen repairs and envelope assemblies write the spec sections.→SitetechwareRepair inspectionsRepair quantities become the field checklist during construction.
Pricing
Pay for what you use.
Sold on its own by the project or by the year, or bundled with the other suites. Prices are quoted during early access.
Per structure
One building, garage or bridge, survey through repair package.
- Credits toward a seat
Quoted per structure
Annual seat
Unlimited structures for each engineer on your team.
- All Inspect and Repair modules
Annual, per seat
Full suite
Add Inspectechware to the other suites in one license.
- One sign-in, one structure record
Request a quote
Questions
Common questions.
Is Inspectechware available now?
Not yet. Geotechware ships first. Join the list and you'll hear when the first inspection modules open for early access.
Does it work offline in a garage?
That is the plan. Surveys save on the tablet and sync when you are back in signal.
Where did the envelope work go?
Into the Envelope module inside Inspectechware: condensation and wind uplift checks, field water and air tests, and condition surveys.
How does it relate to Spectechware?
Spectechware writes the repair and restoration spec sections. Inspectechware decides which repairs go where and how much, then hands that to the spec.
Who checks the analyses?
Every method is built from published references, and each suite gets an outside PE review before release.
Contact
Get early access
Tell us what kinds of structures you inspect and repair most, and we'll build those first.
JT
Joe Troescher, PE
Founder. Licensed professional engineer in North Carolina. Every analysis is built from published methods and checked against field data.
hello@techwaresuite.com