Landtechware

Modules

What Landtechware covers.

Buy the modules you need. Each one reads the same soil profile and writes the same report format as the rest of Techware Suite.

Survey

Field data + COGO

Import total station and GNSS data, reduce traverses and run coordinate geometry.

Boundary + plats

Boundary resolution from deeds and found monuments, with closure checks and a plat sheet.

Topo surfaces

Surfaces and contours from survey points and breaklines.

Develop

Site grading + earthwork

Proposed grades, slopes and pads, with cut and fill volumes against the existing surface.

Subdivision layout

Lots, rights-of-way and easements laid out to the zoning rules you set.

Utility layout

Water, sewer and storm lines laid out on the plan and sized in the Hydro module.

Stake

Construction staking

Stakeout points and cut sheets for the field crew, straight from the design.

landtechware hydroModule

Runoff

Peak flows and hydrographs by the rational method and NRCS curve numbers.

RationalNRCS TR-55

Detention routing

Stage-storage-discharge routing with outlet structures you can tune.

Storage indication

Pipe + culvert sizing

Capacity, velocity and hydraulic grade line for storm pipes and culverts.

Manning

Water distribution

Pressure and fire flow through a pipe network.

Sanitary sewer

Gravity sewer sizing from population and peaking factors.

Floodplain + open channel

Water surface profiles for channels and culverts.

FEMA

Bridge scour + coastal

Scour at piers and abutments, and wave runup on coastal slopes.

FHWA HEC-18

landtechware roadModule

Roadway geometry

Horizontal and vertical alignments, sight distance and cross sections against design speed.

AASHTO Green Book

Intersections + roundabouts

Turn lanes, tapers and roundabout geometry with truck turning checks.

Capacity + level of service

Delay and level of service for signalized, stop-controlled and roundabout intersections.

HCM

Signal timing

Cycle length, splits and coordination for a corridor.

MUTCD

Traffic impact studies

Trip generation, distribution and before-and-after level of service for a new development.

ITE Trip Generation

Crash analysis

Predicted crash frequency for roadway segments and intersections.

HSM

How it works

Four steps, one record.

Bring in the field data

Total station and GNSS files come in and reduce to coordinates.

Resolve and survey

Boundary, topo and existing features on one base map.

Lay out the site

Grading, lots and utilities designed on the same surface.

Plat and stake

Plat sheets for recording and cut sheets for the crew.

One coordinate base

Survey once, and every suite works on the same map.

Borings, wells, walls, roads and repairs are all located on the survey. Landtechware sets the coordinates once, so every other suite places its work on the same base.

Borings and wells from Geotechware placed on the survey
Grading volumes that match Sitetechware quantities
Utilities and roads sized in the Hydro and Road modules without redrawing

Existing groundProposed gradeCutFill

Outputs

Reports a PE can seal.

Every module ends in a calc package laid out the way a reviewing engineer reads it, as PDF and editable Word.

ALTA/NSPSLandXMLNRCS TR-55ManningFEMAAASHTO Green BookHCMMUTCDHSM

Boundary + plat sheetsPDF

Grading + earthwork volumesCut and fill

Drainage reportPDF + Word

Traffic studyPDF + Word

Stakeout points + cut sheetsCSV + PDF

Part of Techware Suite

Enter it once. The next suite already knows.

→GeotechwareBorings + subgradeBorings and pavement subgrade come from Geotechware on the same coordinates.→StructechwareBridges + wallsBridge crossings and site walls go to Structechware.→SpectechwareSite sectionsGrading, utilities and paving write the site work spec sections.→SitetechwareQuantities + stakingEarthwork volumes and stakeout follow the job into construction.

Pricing

Pay for what you use.

Sold on its own by the project or by the year, or bundled with the other suites. Prices are quoted during early access.

Per project

One site, survey through plat.

Credits toward a seat

Quoted per project

Annual seat

Unlimited projects for each surveyor or designer.

All Survey, Develop and Stake modules

Annual, per seat

Full suite

Add Landtechware to the other suites in one license.

One sign-in, one coordinate base

Request a quote

Questions

Common questions.

Is Landtechware available now?

Not yet. Geotechware ships first. Join the list and you'll hear when the first survey modules open for early access.

Are stormwater and roads separate products?

No. The Hydro and Road modules live inside Landtechware, so drainage and roads are designed on the same survey and grading surface.

Does it replace my CAD platform?

Not at first. It exports LandXML, CSV and PDF so your drafting tools keep working, and it keeps the data every other suite needs.

Which instruments does it read?

Tell us your total stations and GNSS receivers and we'll start with those file formats.

Who signs the plat?

Your licensed surveyor does. Landtechware checks closure and lays out the sheet.

Contact

Get early access

Tell us what survey and site work your team does most, and we'll build those modules first.

Joe Troescher, PE
Founder. Licensed professional engineer in North Carolina. Every analysis is built from published methods and checked against field data.

hello@techwaresuite.com