Building members
Beams, columns and slabs in steel, concrete, wood and masonry.
Modules
What Structechware covers.
Buy the modules you need. Each one reads the same soil profile and writes the same report format as the rest of Techware Suite.
Design
Lateral systems
Wind and seismic loads distributed to frames, braces and shear walls.
Bridges
Girder and slab bridges with live load distribution and rating.
Retain
Cantilever concrete walls
Stem and footing design with overturning, sliding and bearing checks.
CMU walls
Reinforced masonry walls designed to the masonry code.
MSE walls
External stability with reinforcement length and spacing.
Soldier pile + sheet pile walls
Cantilever and braced walls with embedment and wall deflection.
Serviceability
Deflection checks
Beams, slabs, wall tops and pile heads against the limits you set.
Floor vibration
Walking vibration checks for offices, labs and pedestrian areas.
Existing structures
Load rating
Rate existing members and walls for new loads, with field measurements as input.
How it works
Four steps, one record.
1
Pull the soil profile
Layers, strengths and groundwater come over from Geotechware. Nothing is retyped.
2
Set geometry and loads
Wall height, surcharge, seismic and water, or span and load for a member.
3
Check strength and movement
Strength and deflection side by side, against the limits you choose.
4
Seal the calc package
A full package as PDF and editable Word, laid out for review.
Movement first
How far it moves, not only whether it holds.
A wall that passes strength can still crack the building behind it. Structechware puts the deflected shape next to the limit on every wall and member.
- Wall deflection with depth for soldier pile and sheet pile walls
- Owner and code limits drawn on the same plot
- Springs from a Geotechware lateral test, when you have one
Predicted deflectionOwner limit
Outputs
Reports a PE can seal.
Every module ends in a calc package laid out the way a reviewing engineer reads it, as PDF and editable Word.
ACI 318TMS 402AISC 360IBCASCE 7AASHTO LRFDNCMAFHWA GEC
Wall calc package
PDF + WordDeflected shape plots
Per wallFloor vibration summary
Per bayLoad rating table
Per memberQuantities
Concrete, block, steelPart of Techware Suite
Enter it once. The next suite already knows.
→GeotechwareSoil profileLayers, groundwater and measured springs come in from Geotechware.→LandtechwareBridge crossingsRoad alignments and water levels from Landtechware set the bridge and wall geometry.→InspectechwareDamaged membersSection loss mapped in Inspectechware feeds the load rating.→SpectechwareStructural sectionsMembers and materials write the spec sections.→SitetechwareMonitoringPredicted deflection becomes the inclinometer alarm level.
Pricing
Pay for what you use.
Sold on its own by the project or by the year, or bundled with the other suites. Prices are quoted during early access.
Per project
One project, every wall and member on it.
- Credits toward a seat
Quoted per project
Annual seat
Unlimited projects for each engineer on your team.
- All Retain and Serviceability modules
Annual, per seat
Full suite
Add Structechware to the other suites in one license.
- One sign-in, one soil profile
Request a quote
Questions
Common questions.
Is Structechware available now?
Not yet. Geotechware ships first. Join the list and you'll hear when the first structural modules open for early access.
Does it replace my structural program?
It is built to: members, lateral systems, bridges and walls, from published methods, with the soil profile already in place.
Can it use my load test results?
Yes. Springs from a Geotechware lateral test can drive soldier pile and sheet pile wall deflection.
Who checks the analyses?
Every method is built from published references, and each suite gets an outside PE review before release.
Contact
Get early access
Tell us which walls and checks you run most, and we'll build those first.
JT
Joe Troescher, PE
Founder. Licensed professional engineer in North Carolina. Every analysis is built from published methods and checked against field data.
hello@techwaresuite.com